• TIPS AND TRICKS

Ink Drying Tips

Four factors contribute to ink drying time during the printing process. Ink Compatibility, Print Speed, Time and ICC profiles determine how fast the ink dries. The time it takes the ink to properly dry affects the quality of the final print. Ink…
Read more

FAB6 Tips

MAGIC FAB6 is a 100% polyester woven fabric with our proprietary matte coating that creates vibrant, long-lasting prints. It can be used in applications such as wall décor, banners, roll-up banners and retail advertising. Here are some FAB6…
Read more

Laminating Guide

TYPES OF LAMINATE Heat Activated – The adhesive requires high levels of heat to be activated before it will adhere to the media. Pressure Sensitive – The adhesive is aggressive and requires pressure to adhere to the print. Heat is…
Read more

Window Film Tips

SURFACE PREP BEFORE PRINTING Clean your printer thoroughly of dust and debris that could stick to the product.  The adhesive side of the window perf is the print side. Do not use the take-up reel with this type of product. For large projects…
Read more

Mounting Canvas onto Stretcher Frames

PREPARATION Allow images to dry for at least 24 hours before handling. Desired surface treatments should be applied and completely dry prior to stretching onto a frame. It is recommended to allow canvas to rest in room temperature for several…
Read more

Vinyl Installation

SURFACE PREPARATION Before installation, thoroughly clean the application surface. Remove any additional residual residue such as tape with a razor blade. Plastics and glass surfaces should be cleaned with window cleaner such as Windex.…
Read more

Banner Installation

PROTECTING THE BANNER A thin pressure sensitive adhesive overlaminate can be used to protect most banners except for vinyl. Applying laminates to one side of a banner may result in inwards curling and adhesion failure. It is recommended to…
Read more

Wallcovering Installation

WATER RESISTANCE & SURFACE PROTECTION Pigment, solvent, latex and UV inks provide a high level of water resistance. Higher ink saturation can affect the water fast properties and show ink bleed in heavily saturated areas. Liquid lamination…
Read more
BACK TO RESOURCES