Alternative Profiles

Magic products are developed with OEM (Original Equipment Manufacturer) printers and printer settings as a key benchmark. Developing our products to this specification allows a wider range of compatibility and excellent results with generic OEM printer settings. We have a list of print profiles for every combination of printers. We strive to have dedicated ICC profiles for every material / printer / ink / RIP combination. If Magic does not have a profile for your setup, you can use the following procedure.

  1. Search the OEM’s profile library for the closest media match. Use media type finish thickness.
  2. Print a small test image, approximately 8.5” x 11”, using the OEM profile.
  3. Evaluate the printed test image to determine if it is acceptable.

ISSUES?

Need more assistance with your print profiles?

  • Adjust printer temperature, adjust speed (pass count & delay) or switch to uni-directional mode. These adjustments will improve ink adhesion, coalescence and print quality.

Check out more tips, and tricks here, or see what products we have to offer by clicking this link 🙂

/by